Step 1 - Remove the Eyebolt from the SAAV
Using an adjustable or 16mm (5/8") wrench, remove the eyebolt from the far end of the SAAV. This action will require a fair amount of force.
Figure 1: Remove the Eyebolt from the far end of the SAAV using sufficient force to break the seal
NOTE: To remove the eyebolt, it is necessary to "break" the threadlock seal between the threads of the eyebolt and the threads of the SAAV.
Step 2 - Prepare the SAAV and the Silent Segments
Remove the silent segments from the reel. Apply the included semi-permanent threadlocker (Loctite or similar) to the threads of the silent string.
Step 3 - Attach the Silent Segments
Attach the silent segments to the SAAV, ensuring there is no cross-threading.
Figure 2: Attach the Silent Segments to the far end of the SAAV
Step 4 - Attach the Eyebolt
Attach the eyebolt to the far end of the silent segments using threadlocker, ensuring there is no cross-threading.
Figure 3: Attach the Eyebolt to the far end of the Silent Segments