Getting Started 14

• Measurand Product Manuals
• SAAV Installation Quick Start Guide
• SAAV for Convergence Monitoring Quick Start Guide
• Horizontal Installation Quick Start Guide
• Long Term Data Collection Quick Start Guide

See all 14 articles

Theory 4

• Understanding how position information is determined for ShapeArrays
• Understanding Deviation and Displacement in ShapeArray Data
• Orienting ShapeArray Data
• Cyclical Software Adjustment

ShapeArray (SAA) 19

• Ordering Guide
• Installing SAAV in 27 mm ID Conduit
• Installing SAAV Into Existing Inclinometer Casing
• Installing SAAV with the Compression Clamp
• Installing SAAV for Convergence Monitoring

See all 19 articles

Interfaces 6

• Connecting a ShapeArray to a PC Using the SAA232
• Connecting ShapeArrays to a PC Using the SAA232-5
• Connecting to a PC Using the SAAFPU
• Connecting a ShapeArray to an Android Device Using the SAAFPU
• Connecting to a PC Using the SAAUSB

See all 6 articles

Accessories 11

• Attaching Silent Segments to SAAV
• Finishing the Installation Process Using the SAAF Install Kit
• How to Create and Use a Custom SAAF Install Kit Using Couplers and Set Screws
• How to Create and Use an Install Kit Using Slot Cuts and Gear Clamps
• Changing the Collar on the SAAV Casing Cap's Weather-Resistant Enclosure

See all 11 articles

ShapeArray Data Acquisition Systems (DAS) 1

• How to Wire a ShapeArray Data Acquisition System (DAS)

SAASuite 2

• How to Download and Install SAASuite
• How to Download Beta Software

SAARecorder 18

• Performing a Complete Diagnostic Test on a ShapeArray
• Saving Raw Data
• Verifying your SAAV Installation
• Saving a Text Snapshot of SAA Data
• Disabling SAAScan Segments

See all 18 articles

SAACR_raw2data 5

• SAACR_Raw2Data How-To Guide
• Creating an Archive To Improve Conversion Speed For Large Data Sets
• Using the SAACR_raw2data Magtool
• Applying Adjustments to Data using SAACR_raw2data
• Creating Site Files for Convergence and Superset ShapeArrays

SAACR_FileGenerator 2

• SAACR_FileGenerator How-To Guide
• Integrating Non-ShapeArray Sensors into ShapeArray Logger Programs

SAACR Utilities 2

• Using SAACR_DataChecker
• SAACR_raw2raw_concat How-To Guide

LoggerNet 6

• Setting up the Logger
• Campbell Scientific Data Logger Data File Management
• Collecting Data from a CR Series Data Logger
• Create the "pref_project.txt" File
• Setting Up Automated Data Conversions

See all 6 articles

PC200W 3

• Setting up the Logger
• Campbell Scientific Data Logger Data File Management
• Collecting Data from a CR Series Data Logger

SAAView 5

• Using SAAView to Visualize ShapeArray Data
• Generating Images from the Command Line with SAAView AutoCall
• Reproducing SAAView Data Graphs from DIY Export Data
• Setting Alarms
• Diagnosing Rotation in ShapeArray Data using SAAView

Checking Software Updates and ShapeArray (SAA) Functionality 11

• I'm having issues installing SAASuite and SAACR Applications. What am I doing wrong?
• How do I get calibration files for my ShapeArray?
• How do I check for and get software updates?
• Why is SAACR_raw2data being identified as a problem by my antivirus software?
• What are the Calibration Requirements for a ShapeArray?

See all 11 articles

Setting Up ShapeArray (SAA) Data Collection 11

• Can I run multiple instances of SAARecorder at the same time?
• Can SAARecorder be started automatically with certain ShapeArrays whenever the PC boots up?
• I am having problems getting wireless data from my ShapeArrays in SAARecorder. What should I do?
• Why doesn’t my Android tablet or phone connect to the SAAFPU’s Bluetooth device?
• I have some vibrating wire piezometers (or other sensors) that I read already with a Campbell Scientific logger and I want to read ShapeArrays with this same logger. How do I do that?

See all 11 articles

Converting and Exporting ShapeArray (SAA) Data 12

• How should I set azimuth for converting data?
• I'm not sure if I created my site calibration file properly because SAACR_raw2data crashes. How do I fix it?
• SAACR_raw2data just disappears when trying to convert my data without offering any feedback that I can see. What should I do?
• How can I collect and convert data logger data automatically?
• Can I run multiple instances of SAACR_raw2data at the same time?

See all 12 articles

Checking and Viewing ShapeArray (SAA) Data 14

• How do I check data collected using a data logger to make sure it is good?
• How do I check my SAAF for twist?
• I just saved 3 samples of data. Why does SAAView only show one frame?
• My ShapeArray has stopped responding and is no longer providing data, or all of my data logger samples are full of zeros. What should I do?
• I have one or more magnetometers in my ShapeArrays. I did not apply any azimuth corrections to my data in SAACR_raw2data or SAAView. So what “real-world” directions are the X and Y data in?

See all 14 articles

Advanced Uses For ShapeArrays (SAAs) and Dealing With Hardware Issues 11

• I want to have an alarm get triggered and sent to me if my data that is automatically converted using SAACR_raw2data exceeds certain limits. How do I do this?
• How do I monitor dynamic acceleration or vibration with a ShapeArray? Can I measure static shape at the same time?
• How do I diagnose an unresponsive ShapeArray for cable damage?
• How do I wire the ShapeArray Connector onto the ShapeArray cable?
• How do I turn off or ignore segments?

See all 11 articles

ShapeArray Installation 4

• What should I use as a reel stand for installing ShapeArrays?
• What grout mix is recommended for ShapeArray installation?
• How should ShapeArray (SAA) be Installed Near Sources of High Voltage?
• How Do I Safely Bury a Vertically Installed ShapeArray?

Discontinued Hardware 4

• SAAPZ
• SAAR
• Network Data Concentrators
• SAAXYZ

Discontinued Software 2

• SAACR_cart2cart How-To Guide
• SAACR_cart2manycart How-To Guide