The maximum cable lengths for SAAX1000-002 at 12.0 V are given in the table below. Use an approved splice kit to add any cable to an existing SAAX, and ensure you account for the cable that is already attached to the ShapeArray.
WARNING: 14 AWG cable (SKUCAB14) will not directly fit into the cable glands and connectors DTSAA loggers. To accommodate 14 AWG cable, a special adapter must be used at the end of the ShapeArray cabling. This adapter should be specified at the time of purchase to ensure compatibility with these loggers.
SAAX in Regular Power Mode with Ackcio Beam
| SAAX M2 Segments | RST EL380004 (22 AWG) Max cable length m | Measurand SKUCABU18 Max cable length m | Measurand SKUCABK14 Max cable length m |
| 10 | 1200 | 1200 | 1200 |
| 20 | 880 | 1200 | 1200 |
| 30 | 622 | 1200 | 1200 |
| 40 | 479 | 1162 | 1200 |
| 50 | 388 | 942 | 1200 |
| 60 | 325 | 789 | 1200 |
| 70 | 279 | 677 | 1200 |
| 80 | 243 | 591 | 1200 |
| 90 | 215 | 522 | 1200 |
| 100 | 192 | 466 | 1195 |
SAAX in Low Power Mode with Ackcio Beam
| SAAX M2 Segments | RST EL380004 (22 AWG) Max cable length m | Measurand SKUCABU18 Max cable length m | Measurand SKUCABK14 Max cable length m |
| 10 | 1200 | 1200 | 1200 |
| 20 | 1200 | 1200 | 1200 |
| 30 | 1200 | 1200 | 1200 |
| 40 | 1106 | 1200 | 1200 |
| 50 | 989 | 1200 | 1200 |
| 60 | 893 | 1200 | 1200 |
| 70 | 812 | 1200 | 1200 |
| 80 | 742 | 1200 | 1200 |
| 90 | 682 | 1200 | 1200 |
| 100 | 629 | 1200 | 1200 |
| 110 | 582 | 1200 | 1200 |
| 120 | 540 | 1200 | 1200 |
| 130 | 502 | 1200 | 1200 |
| 140 | 468 | 1136 | 1200 |
| 150 | 437 | 1060 | 1200 |
| 160 | 408 | 990 | 1200 |
| 170 | 381 | 926 | 1200 |
| 180 | 357 | 866 | 1200 |
| 190 | 334 | 810 | 1200 |
| 200 | 312 | 758 | 1200 |