You will need to setup an alarm(s) using the AlarmSet button section in ShapeArray™ Viewer (formerly known as SAAView). Then when SAACR_raw2data gets called to convert new data, it will automatically check for any defined alarm condition and issue the appropriate alarm if necessary.
I want to have an alarm get triggered and sent to me if my data that is automatically converted using SAACR_raw2data exceeds certain limits. How do I do this? Print
Modified on: Mon, 3 May, 2021 at 2:04 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.