Checking Software Updates and ShapeArray (SAA) Functionality 12

• I'm having issues installing SAASuite and SAACR Applications. What am I doing wrong?
• How do I get calibration files for my ShapeArray?
• How do I check for and get software updates?
• Why is SAACR_raw2data being identified as a problem by my antivirus software?
• What are the Calibration Requirements for a ShapeArray?

View all 12

Setting Up ShapeArray (SAA) Data Collection 12

• Can I run multiple instances of SAARecorder at the same time?
• Can SAARecorder be started automatically with certain ShapeArrays whenever the PC boots up?
• I am having problems getting wireless data from my ShapeArrays in SAARecorder. What should I do?
• Why doesn’t my Android tablet or phone connect to the SAAFPU’s Bluetooth device?
• I have some vibrating wire piezometers (or other sensors) that I read already with a Campbell Scientific logger and I want to read ShapeArrays with this same logger. How do I do that?

View all 12

Converting and Exporting ShapeArray (SAA) Data 12

• How should I set azimuth for converting data?
• I'm not sure if I created my site calibration file properly because SAACR_raw2data crashes. How do I fix it?
• SAACR_raw2data just disappears when trying to convert my data without offering any feedback that I can see. What should I do?
• How can I collect and convert data logger data automatically?
• Can I run multiple instances of SAACR_raw2data at the same time?

View all 12

Checking and Viewing ShapeArray (SAA) Data 15

• How do I check data collected using a data logger to make sure it is good?
• How do I check my SAAF for twist?
• I just saved 3 samples of data. Why does SAAView only show one frame?
• My ShapeArray has stopped responding and is no longer providing data, or all of my data logger samples are full of zeros. What should I do?
• I have one or more magnetometers in my ShapeArrays. I did not apply any azimuth corrections to my data. So what “real-world” directions are the X and Y data in?

View all 15

Advanced Uses For ShapeArrays (SAAs) and Dealing With Hardware Issues 11

• I want to have an alarm get triggered and sent to me if my data that is automatically converted using SAACR_raw2data exceeds certain limits. How do I do this?
• How do I monitor dynamic acceleration or vibration with a ShapeArray? Can I measure static shape at the same time?
• How do I diagnose an unresponsive ShapeArray for cable damage?
• How do I wire the ShapeArray Connector onto the ShapeArray cable?
• How do I turn off or ignore segments?

View all 11

ShapeArray Installation 5

• What should I use as a reel stand for installing ShapeArrays?
• What grout mix is recommended for ShapeArray installation?
• How should ShapeArray (SAA) be Installed Near Sources of High Voltage?
• What is Bend Radius?
• Can SAAV's be installed in telescopic casing?