In the rare case that friction is an issue when inserting the ShapeArray (SAA) into a pre-installed conduit, you can use electrical cable-pulling lubricant to minimize the friction between the ShapeArray and the conduit. Any other lubricants are discouraged since they could damage the ShapeArray's water proofing material.
I need to manage friction when inserting a ShapeArray into a pre-installed casing. What can I use to lubricate the ShapeArray? Print
Modified on: Thu, 6 Apr, 2017 at 11:47 AM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.