If the contents of one or more logger .DAT files are edited incorrectly, it is possible that SAACR_raw2data will no longer be able to parse all of the data samples correctly, and could crash or halt unexpectedly as a result. You can try opening the .DAT data files for each ShapeArray (SAA) in SAACR_DataChecker and it might provide feedback about any data samples that are not formatted correctly, possibly with the option of filtering out the incorrect samples. If it is not possible to find any incorrectly formatted samples, then it is recommended that the logger .DAT files be sent to Measurand (support@measurand.com) for analysis.