Converting and Exporting ShapeArray (SAA) Data
Frequently asked questions concerning converting and exporting ShapeArray (SAA) data.
When installing a ShapeArray, it is recommended that the ShapeArray azimuth offset be measured. This offset is then entered into the ShapeArray software du...
Mon, 24 Sep, 2018 at 2:19 PM
You can find detailed instructions for creating site files in the Creating Site Files for Convergence and Superset ShapeArrays guide. Should you have any i...
Mon, 19 Jun, 2017 at 1:58 PM
Please let us know what version of SAACR_raw2data you were using and send us all of the files from the project folder that you were trying to convert. The ...
Wed, 6 Mar, 2019 at 1:27 PM
Measurand's data conversion program, SAACR_Raw2Data can be executed from the command line to convert ShapeArray data without user intervention. This ca...
Fri, 26 Apr, 2019 at 4:02 PM
Yes. SAACR_raw2data version 4.00 and above can run multiple instances at the same time on the same computer. Each instance of SAACR_raw2data that is starte...
Tue, 5 Mar, 2019 at 3:52 PM
The process of converting ShapeArray (SAA) data is quite calculation intensive, and for very large data sets, this may require a considerable length of tim...
Tue, 5 Mar, 2019 at 3:50 PM
If the contents of one or more logger .DAT files are edited incorrectly, it is possible that SAACR_raw2data will no longer be able to parse all of the data...
Tue, 5 Mar, 2019 at 3:48 PM
The steps in the Raw2Data How-to Guide should be followed to convert the raw data. In step 6 where you configure the export format, you should select the U...
Tue, 5 Mar, 2019 at 3:39 PM
To get ShapeArray data into Gtilt, it needs to be converted and exported from raw data collected with Measurand's SAARecorder software or with a Campbe...
Tue, 5 Mar, 2019 at 3:32 PM
Some users have experienced difficulty with SAACR_raw2raw_concat crashing as soon as the application is started. This problem can arise if the following c...
Tue, 8 Nov, 2016 at 4:03 PM