SAAV is the newest and most advanced ShapeArray model. Inspired by direct feedback from customers, Measurand developed a new installation method unique to the SAAV that allows the array to be installed easily into existing conventional inclinometer casings or any casing from 47 mm inside diameter (ID) to 100 mm ID. SAAV can also be installed in traditional 27 mm ID conduit. Measurand's Quick Start guides are short concise hard copy instructions that are typically included with Measurand hardware.
- The attached SAAV Quick Start Guide should be used for standard 70 mm outside diameter (OD) and 80 mm OD casings.
- The attached Installing SAAV with the Compression Clamp Quick Start Guide should be used for other casings from 47 mm inside diameter (ID) to 100 mm ID
- The attached Installing SAAV in 27 mm Quick Start Guide should be used for installations in 27 mm ID conduit