LoggerNet

Step-by-step guides for performing common tasks related to ShapeArrays with Campbell Scientific's LoggerNet software.

Setting up the Logger
When using a Campbell Scientific data logger to collect data from ShapeArrays (SAAs), it is necessary to use Campbell Scientific software to program the da...
Mon, 9 Apr, 2018 at 9:49 AM
Campbell Scientific Data Logger Data File Management
It is critical that the data files generated by the Campbell Scientific data logger are effectively managed. The output folders for data logger data files a...
Mon, 6 Feb, 2017 at 3:09 PM
Collecting Data from a CR Series Data Logger
When the logger program to collect ShapeArray data is uploaded to a Campbell Scientific CR series data logger and started, a number of preliminary samples w...
Mon, 9 Apr, 2018 at 9:51 AM
Create the "pref_project.txt" File
To setup automated data conversions, it is necessary to collect and convert data manually at least once to create the "pref_project.txt" file. ...
Wed, 15 Feb, 2017 at 8:54 AM
Setting Up Automated Data Conversions
Automated data conversion requires generating a "pref_project.txt" file. This requires doing a data conversion manually using SAACR_raw2data. Plea...
Thu, 23 Aug, 2018 at 12:56 PM
Data Logger Project Files for ShapeArray
There are five project files generated by Campbell Scientific data loggers when they are used to collect ShapeArray data. These files contain project inform...
Tue, 5 Dec, 2017 at 2:51 PM