ShapeArray Installation
Frequently asked questions concerning ShapeArray installation
A reel stand can easily be constructed using saw horses from the hardware store and a long sturdy metal bar or pole. The weight of a ShapeArray and its reel...
Mon, 26 Apr, 2021 at 11:12 AM
The grout mix recommended for installation of ShapeArray is given in the table below. It is important to use bentonite powder for the mix since bentonite pe...
Thu, 6 Apr, 2017 at 11:52 AM
Measurand ShapeArrays are designed to be highly resistant to interference from electrical and magnetic fields. All current models of ShapeArrays are fully d...
Fri, 28 Jul, 2017 at 3:22 PM
In some situations a vertically installed ShapeArray needs to be buried, such as a during a tailings dam lift. In these situations, care should be taken to ...
Mon, 22 Jul, 2019 at 11:08 AM
The SAA Bend Angles diagnostic in SAARecorder provides a listing of the bend radii for each vertex (joint) in a ShapeArray. Bend radius is a measure of the ...
Wed, 30 Mar, 2022 at 12:39 PM